For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Updated on 14.3.2024

  • Publication citations, H-index and ranking
  • Scopus
  • H-index: 35
  • Citations: 3229

Scopus author profile: https://www.scopus.com/authid/detail.uri?authorId=14025591900

  • Google scholar
  • H-index: 37
  • Citations: 4124

Google scholar citation indices: http://scholar.google.com/citations?user=XuAsSrQAAAAJ&hl=en

 

 

 

  • Books: Proceedings of 

- the 2nd international conference on Steelmaking and Continuous Casting (ISCC2022), Hormozgan Steel Company (HOSCO), Bandar Abbas, Iran, 2022.

- the 3rd international conference on "Welding and Non Destructive Testing (ICWNDT 2021)", Isfahan University of Technology, Isfahan, Iran, 2021.

- the 1st national conference on Continuous Casting (ICCC 2019), Hormozgan Steel Company (HOSCO), Bandar Abbas, Iran, 2019.

- the 5th joint conference of Iranian Metallurgical Engineers Society and Iranian Foundry men's Society, Isfahan University of Technology, Isfahan, Iran, 2011.

- Steel Symposium 84, Isfahan University of Technology, Isfahan, Iran, 2005.

 

  • International journal papers

127

Noohi Z., Niroumand B., Panjepour M., Timeli G., “A New Generation of Metal Chillers to Control the Solidification Structure of Al-4.5wt%Cu Alloy”, Journal of Materials Research and Technology, 28 (2024) 2488-2503 (https://doi.org/10.1016/j.jmrt.2023.12.162).

126

Talebi M., Razaghian, A., Saboori, A., Niroumand, B., “Effects of Cu addition and heat treatment on the microstructure and hardness of pure Ti prepared by Selective laser melting (SLM)”, Journal of Ultrafine Grained and Nanostructured Materials, 56 (2023) 213-223.

125

 Salehi Mobarakeh V., Niroumand B., “Effects of homogenization heat treatment on microstructure, mechanical and corrosion properties of Transient Liquid Phase (TLP) bonded Inconel 617/ AISI 310 stainless steel”, Metallography, Microstructure, and Analysis, 1 (2024).

124

Karimi, A., Maleki, A., Taherizadeh, A., Niroumand. B., “Synthesis and characterization of Sn–Cu/SiO2(np) lead-free nanocomposite solder through angular accumulative extrusion”, Journal of Materials Science: Materials in Electronics, 34 (2023), 1455 (doi.org/10.1007/s10854-023-10783-2).

123

 Niroumand, B., Jazini Dorcheh A., “Influence of Melt Infiltration Parameters on Structural and Mechanical Properties of Al-4.3wt.%Cu-EP Syntactic Foam”, Metals, 13 (2023), 1345 (doi.org/10.3390/met13081345).

122

Salehi Mobarakeh V., Niroumand B., Atapour M, Shamanian M., “Effects of Transient Liquid Phase Bonding Time on Microstructure, Mechanical and Corrosion Properties During Bonding of Inconel 617/AISI 310 Stainless Steel”, Metallography, Microstructure, and Analysis, 12 (2023) 714–729, (doi.org/10.1007/s13632-023-00986-8).

121

 Mosallanejad M.H., Niroumand B., Ghibaudo C., Biamino S., Salmi A., Fino P.,Saboori A., “In-situ alloying of a fine grained fully equiaxed Ti-based alloy via Electron Beam Powder Bed Fusion Additive Manufacturing process”, Additive Manufacturing, 56 (2022), 102878 (doi.org/10.1016/j.addma.2022.102878).

120

Noohi Z., Nosoohian S., Niroumand B., Timelli G., “Use of low melting point metals and alloys (Tm < 420 ºC) as Phase Change Materials: A review”, Metals, 12 (6) (2022), 945 (https://doi.org/10.3390/met12060945).

119

 Sadeghi M., Niroumand B., “Design and characterization of a novel MgAlZnCuMn Low Melting point Light Weight High Entropy Alloy (LMLW-HEA)”, Intermetallics, 151 (2022), 107658 (doi.org/10.1016/j.intermet.2022.107658).

118

Ebrahimi Dinani B., Ashrafi A., Salimijazi H.R., Niroumand B., Doostmohammadi, A., “Microstructural evolution and corrosion properties of Fe-based amorphous coating by laser cladding on 316L stainless steel”, Transactions of the Institute of Metal Finishing- The International Journal of Surface Engineering and Coatings, (2022), 283-292 (doi.org/10.1080/00202967.2022.2061169).

117

 Hosseini M., Niroumand B., Maleki A., Issa H.K., “Manufacturing and Characterization of Sn-Cu/SiO2np Lead-free Nanocomposite Solder by Accumulative Roll Bonding (ARB) Process”, Journal of Materials Science: Materials in Electronics, (2022), Accepted (doi.org/10.1007/s10854-022-08286-7).

116

 Malaki, M., Fadaei Tehrani, A., Niroumand, B., Abdullah, A., “ Ultrasonically stir cast SiO2/A356 metal matrix nanocomposites”, Metals, 11 (2021), 1-18 (doi.org/10.3390/met11122004).

115

 Mosallanejad M.H., Sanaei S., Atapour M., Niroumand B., Luliano L., Saboori A., "Microstructure and Corrosion Properties of CP-Ti Processed by Laser Powder Bed Fusion under Similar Energy Densities", Acta Metallurgica Sinica (English Letters), (2022), Accepted (doi.org/10.1007/s40195-022-01376-9).

114

Noohi Z., Niroumand B., Timelli G., "Numerical simulation of the effects of a Phase Change Material (PCM) on solidification path of gravity sand cast Al-Cu alloy", International Journal of the Italian Association for Metallurgy, 11 (2021), 25-30.

113

 Zare M., Maleki A., Niroumand B., "In-situ Al-SiOC composite fabricated by in-situ pyrolysis of a silicone polymer gel in aluminum melt", International Journal of Metalcasting, (2021), 1-20 (doi.org/10.1007/s40962-021-00658-9).

112

 Malaki M., Fadaei Tehrani A., Niroumand B., Gupta M., "Wettability in Metal Matrix Composites", Metals, 11 (2021) 1034: 1-24 (doi.org/10.3390/met11071034).

111

 Mosallanejad M.H., Niroumand B., Aversa A., Saboori A., “In-Situ Alloying in Laser-Based Additive Manufacturing Processes: A Critical Review”, Journal of Alloys and Compounds, (2021), 159567 (doi.org/10.1016/j.jallcom.2021.159567).

110

 Shayan M., Eghbali B., Niroumand B., "Synthesis and characterization of AA2024-SiO2 nanocomposites through the vortex method", International Journal of Metalcasting, 15 (2021) 1427-1440 (doi.org/10.1007/s40962-021-00574-y).

109

 Sayyar N., Shamanian M., Niroumand B., Kangazian J., Szpunar J.A., “EBSD observations of microstructural features and mechanical assessment of INCOLOY 825 alloy/AISI 321 stainless steel dissimilar welds”, Journal of Manufacturing Processes, 60 (2020), 86-95.

108

 Mosallanejad M.H., Niroumand B., Aversa A., Manfredi D., Saboori A., “Laser Powder Bed Fusion in-situ alloying of Ti-5%Cu alloy: Process-structure relationships”, Journal of Alloys and compounds, 857 (2021), 157558, pp. 1-7.

107

Shayan M., Eghbali B., Niroumand‌ B., “Fabrication of AA2024−TiO2 nanocomposites through stir casting process”, Transactions of Nonferrous Metals Society of China, 30 (2020), 2891-2903.

106

Shayan M., Eghbali B., Niroumand‌ B., “The role of accumulative roll bonding after stir casting process in order to fabricating high-strength and nanostructured AA2024-(SiO2+TiO2) hybrid nanocomposite”, Journal of Alloys and Compounds, 845 (2020), 156281(1-10).

105

Malaki M., Fadaei Tehrani A.R.‌, Niroumand B., “Fatgiue behavior of metal matrix nanocomposites”, Ceramics International, 46, (2020),  23326-23336.

104

Abbasipour, B., Niroumand, B., Monir-Vaghefi, M., Abedi M., “Tribological behavior of A356−CNT nanocomposites fabricated by various casting techniques”, Transactions of Nonferrous Metals Society of China, 29 (2019), 1993-2004.

103

Nasr Esfahani, M.R., Niroumand, B., “Effect of degassing on hot tearing  of A206 aluminum cast alloy”, International Journal of Metalcasting, (2019), https://doi.org/10.1007/s40962-019-00378-1.

102

Shayan, M., Eghbali B., Niroumand B., “Synthesis of AA2024-(SiO2np+ TiO2np) hybrid nanocomposite via stir casting process”, Materials Science and Engineering: A, 756 (2019), 484-491.

101

 Babaee M.H., Maleki A., Niroumand B., “A novel method to improve interfacial bonding of compound squeeze cast Al-Al macrocomposite bimetals: Simulation and experimental studies”,  Transactions of Nonferrous Metals Society of China, 29 (2019), 1184-1199.

100

 Babaee M.H., Niroumand B., Maleki A., Lashani Zand M., “Simulation and experimental verification of interfacial interactions in a compound squeeze cast Al/Al-Cu macrocomposite bimetal”, Transactions of Nonferrous Metals Society of China, 29 (2019), 950-963.

99

Marani  F. and Niroumand B., “Semisolid casting of short freezing range alloys”, Solid State Phenomena, 285 (2018), 247-252.

98

Tavakoli H., Niroumand B., Rezaeian A., “SIMA Processing of Cu34wt.%Zn2wt.%Pb Brass Alloy”, Solid State Phenomena, 285 (2018), 176-182.

97

Sayyar N., Shamanian M., Niroumand B., “Arc weldability of Incoloy 825 to AISI 321 stainless steel welds”, Journal of Materials Processing Technology, 262 (2018), 562-570.

96

Maleki A., Taherizadeh A.R., Issa H.K., Niroumand B., Allafchain A.R., Ghaei A., “Development of a new magnetic aluminum matrix nanocomposite”, Ceramic International, 44 (13), (2018), 15079-15085.

95

Borouni M., Niroumand B., Maleki A., “A study on crystallization of amorphous nano silica particles by mechanical activation at the presence of pure aluminum”, Journal of Solid State Chemistry, 263 (2018), 208-215.

94

Riahi S., Niroumand B., Dorri Moghadam A., Rohatgi, P.K., “Effect of Microstructure and Surface Features on Wetting Angle of a Fe-3.2Wt%C.E. Cast Iron with Water”, Journal of Applied Surface Science, 440 (2018), 341-350.

93

Pourmahmoodi H.R., Niroumand B., “Effect of Pressure on Graphite Morphology and Mechanical Properties of Squeeze Cast Hyper-Eutectic Grey Cast Iron”, Transactions of the Indian Institute of Metals, 71 (2018), 1401-1410.

92

Seiyed Beigi M.T., Niroumand B., “Liquid Segregation Behavior of a Semi-Solid Squeeze Cast A356 Cup-Shaped part”, Materials Science and Technology, 33 (2017), 2203-2211.

91

Maleki A., Hosseini N., Niroumand B., ”A Review on Aluminothermic Reaction of Al/ZnO System”, Ceramics International, 44 (2018), 10-23.

90

Soltani M., Shamanian Esfahani M., Niroumand B., “Structure and Properties of Magnesium Alloy Carbon Nanotubes Nanocomposite and Their Optimization Using Design of Experiments”, Metal Science and Heat Treatment, 36 (2017), 255-261.

89

Zare M., Niroumand B., Maleki A., Allafchian R., “Sol-gel Synthesis of Amorphous SiOC Nanoparticles from BS290 Silicone Precursor”, Ceramics International, 43 (2017), 12898-12903.

88

Etemadi R., Wang B., Pillai K.M., Niroumand B., Omrani E., Rohatgi P., “Pressure Infiltration Processes to synthesis Metal Matrix Composites- A Review of Metal Matrix Composites the Technology and Process Simulation”, Materials and Manufacturing Processes, 33 (2018), 1261-1290.

87

 Borouni M., Niroumand B., Maleki A., “Synthesis and Characterization of In-situ Magnesium Based Cast Nano Composite Via Nano-SiO2 Addition to the Melt”, Materials and Technology, 51 (2017), 945-951.

86

Baghi M., Niroumand B., Emadi R., “Fabrication and Characterization of Squeeze Cast A413-CSF Composites”, Journal of Alloys and Compounds, 710 (2017), 29-36.

85

Senemar M., Niroumand B., Maleki A., Rohatgi P.K., “Synthesis of In-Situ Aluminum Matrix Composite through Pyrolysis of High Temperature Vulcanization (HTV) Silicone”, Journal of Composite Materials, 52 (2018), 123-134.

84

Fathian Z., Maleki, A., Niroumand B., “Synthesis and Characterization of Ceramic Nanoparticles Reinforced Lead-Free Solder”, Ceramic International, 43 (2017), 5302-5310.

83

Borouni Mahmoudsalehi M., Niroumand B., Fathi M., “Evaluation of Nano Ceramic Coating on Radiographic Defects of Thin-Walled AL4-1 Aluminum Alloy Sand Casting”, Metallurgical & Materials Engineering, 22 (2016), 193-204.

82

Soltani M., Shamanian Esfahani M., Niroumand B., “Optimization and Characterization of Surface Mechanical Properties of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiments”, Metallovedenie I Termicheskaya Obrabotka Metallov, (2017), Accepted.

81

Nasr Esfahani M.,, Niroumand B., Kermanpour A., “Evaluation of Lipton-Glicksman-Kurz model for free dendritic growth under an applied electric field”, JOM, 69 (2017), 261-265.

80

Rostamzadeh S., Niroumand B., Maleki A., “A Novel Method for Semi-Solid Casting of Hypereutectic Gray Cast Iron in Expendable Mold”, Solid State Phenomena, (2016), 237-242.

79

Raeissi M., Niroumand B., “Microstructural Evolution and Mechanical Properties of Rheocast Al-7.1Wt%Si Alloy”, Metallurgical & Materials Engineering, 22 (2016) 155-164.

78

Senemar M., Maleki A., Niroumand B., Allafchian R., “A Novel and Facile Method for Silica Nanoparticles Synthesis from High Temperature Vulcanization (HTV) Silicon”, Metallurgical & Materials Engineering, 22 (2016) 1-8.

77

Saadati M.R., Maleki A., Niroumand B., Allafchian R., “A Novel Low Cost Method for the Synthesis of Ceramic Nano Silicon Oxcycarbide Powder”, Ceramics International, 42 (2016) 8531-8536.

76

Hajihashemi M., Shamanian Esfahani M., Niroumand B., “Microstructure and Mechanical Properties of Al-6061-T6 Alloy Welded by a New Hybrid FSW/SSW Joining Process”, Science and Technology of Welding and Joining, 21 (2016) 493-503.

75

Saeidi N., Ashrafizadeh F., Niroumand B., Forouzan M.R.,Mohseni S., Barlat F., “Examination and Modeling of Void Growth Kinetics in Modern High Strength Dual Phase Steels During Uniaxial Tensile Deformation”, Materials Chemistry and Physics, 172 (2016) 54-61.

74

Esmaeilpour M., Niroumand B., Monshi A., Ramezanzadeh B., Salahi E., “The role of Surface Energy Reducing Agent in the Formation of Self-Induced Nanoscale Surface Features and Wetting Behavior of Polyurethane Coatings”, Progress in  Organic Coatings, 90 (2016) 317-323.

73

Maleki, A., Niroumand B., Meratian M., “Effects of Processing Temperature on In-situ Reinforcement Formation in Al(Zn)/Al2O3(ZnO) Nanocomposite”, Metalurgija, 21 (2015) 283-291.

72

Melali P., Ashtijou P., Niroumand B., “Effect of Stirring Speed and Flow Pattern on the Microstructure of a Rheocast Al-Mg Alloy”, Metalurgija, 21 (2015) 35-43.

71

Nasresfahani M., Niroumand B., Kermanpour A., “Effects of Applied Electric Current on the Tip Radius and the Universal Amplitude Coefficient of a Single Growing Dendrite”, Surface Review and Letters, 23 (2016), 1550083 (1-8).

70

Saeidi N., Ashrafizadeh F., Niroumand B., Forouzan M.R.,Mohseni S., Barlat F., “Void Coalescence and Fracture Behavior of Notched and Un-Notched Tensile Tested Specimens in Fine Grain Dual Phase Steel”, Materials Science and Engineering A, 644 (2015) 210-217.

69

Saeidi N., Ashrafizadeh F., Niroumand B., Barlat F., “EBSD Study of Micromechanisms Involved in High Deformation Ability of DP Steels”, Materials & Design, 87 (2015) 130-137.

68

Baghi M., Niroumand B., Emadi R., “PVA Assisted Electroless Ni-P Coating of Carbon Fibers”, Transactions of the Indian Institute of Metals”, (2016) 1775-1781 .

67

Esmaeilpour M., Niroumand B., Monshi A., Salahi E., Ramezanzadeh B., “The effects of Curing Condition on the Surface Characteristics of Two-pack Polyurethane Coatings Containing Low Surface Energy Additive”, Journal of Soft Materials, 13 (2015) 144-149.

66

Soltani M., Shamanian Esfahani M., Niroumand B., “Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing”, International Journal of Advanced Design and Manufacturing Technology (Majlesi Journal of Mechanical Engineering), 8 (2015) 85-95.

65

Reisi M., Niroumand B., Shirani E., “Morphological Evolution of SCN Crystals in a Shear Flow”, Solid State Phenomena, 217-2 (2015) 83-90.

64

Saeidi N., Ashrafizadeh F., Niroumand B., Barlat F., “EBSD Study of Damage Mechanisms in a High Strength Ferrite-Martensite Dual Phase Steel”, Journal of Materials Engineering and Performance, 24 (2015) 53-58.

63

Nasresfahani M., Niroumand B., Kermanpour A., “Design, Fabrication and Testing of an Apparatus for In-Situ Investigation of Free Dendritic Growth Under an Applied Electric Field”, Journal of Crystal Growth, 416 (2015) 169-174.

62

Bagherpoor Torghabe H., Niroumand B., Karbasi M., “On the Effect of Gating System Type on Occurrence of Hot Tears in Al-4wt%Cu Castings”, International Journal of Advanced Manufacturing Technology, 75 (2014) 677-685.

61

Borouni Mahmoudsalehi M., Niroumand B., Fathi M., “Effect of a Nano-Ceramic Mold Coating on the Fluidity Length of Thin-Wall Castings in AL4-1 Alloy Gravity Sand Casting”, Materiali in Tehnologije, 48 (2014) 473-477.

60

Dehnavi M., Niroumand B., Ashrafizadeh F., Rohatgi P.K., “Effects of Continuous and Discontinuous Ultrasonic Treatments on Mechanical Properties and Microstructural Characteristics of Cast Al413-SiCnp Nanocomposite”, Materials Science and Engineering A, 617 (2014) 73-83.

59

Hajihashemi M., Niroumand B., Shamanian Esfahani M., “The Effect of Process Parameters on the Microstructure and Mechanical Properties of Semisolid Cast Al6061”, Metallurgical and Materials Transactions B., 46 (2015) 780-792.

58

Saeidi N., Ashrafizadeh F., Niroumand B., “Development of a New Ultrafine Grained Dual Phase Steel and Examination of the Effect of Grain Size on Tensile Deformation Behavior”, Materials Science and Engineering A, 599 (2014) 145-149.

57

Saeidi N., Ashrafizadeh F., Niroumand B., Forouzan, M.R., Barlat F., “Influence of Bainite Morphology on Ductile Fracture Behavior in a 0.4C-CrMoNi Steel”, Steel Research International, 5 (2015) 528-235.

56

Saeidi N., Ashrafizadeh F., Niroumand B., Forouzan, M.R., Barlat F., “Damage Mechanism and Modeling of Void Nucleation Process in a Ferrite-Martensite Dual Phase Steel”, Engineering Fracture Mechanics, 127 (2014) 97-103.

55

Hajihashemi M., Niroumand B., Shamanian Esfahani M., “Microstructural and Statistical Study of Semisolid Casting of 6061 Alloy Using a Miniature Cooling Slope”, Metallurgical and Materials Transactions B, 45 (2014) 1804-1816.

54

Nasresfahani M., Niroumand B., “A New Criterion for Prediction of Hot Tearing Susceptibility of Cast Alloys”,  Metallurgical and Materials Transactions A, 45 (2014) 3699-3702.

53

Saeidi N., Ashrafizadeh F., Niroumand B., Barlat F., “Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation”, International Journal of Iron and Steel Society of Iran, 10 (2013) 37-42.

52

Hajihashemi M., Shamanian Esfahani M., Niroumand B., “Optimization and Utilization of Semisolid Casting Process for Semisolid welding of A1-6061 Alloy”, Journal of Advanced Materials and Processing, 1 (2013) 19-26.

51

Saeidi, N., Ashrafizadeh F., Niroumand B., “Development of a New Ultrafine Grained Dual Phase Steel and Examination of the Effect of Grain Size on Tensile Deformation Behavior”, Materials Science and Engineering  A, 599 (2014) 145–149.

50

Saeidi, N., Ashrafizadeh F., Niroumand B., Barlat F., “Evaluation of Fracture Micromechanisms in a Fine-Grained Dual Phase Steel during Uniaxial Tensile Deformation”, Steel Research International, 85 (2014) 1386-1392.

49

Jamshidi-Alashti R., Kaskani M., Niroumand B., “Semisolid Melt Squeezing Procedure for Production of Open-Cell Al-Si Foams”, Materials & Design, 56 (2014) 325-333.

48

Ashiri R., Karimzadeh F., Niroumand B., “On Effect of Squeezing Pressure on Microstructural Characteristics, Heat Treatment Response and Electrical Conductivity of an Al-Si-Mg-Ni-Cu Alloy”, Journal of Materials Science and Technology, 30, (20114) 1162-1169.

47

Ashiri R., Niroumand B., Karimzadeh F., “Physical, Mechanical and Dry Sliding Wear Properties of an Al–Si–Mg–Ni–Cu Alloy Under Different Processing Conditions”,  Journal of Alloys and Compounds, 582,(2014) 213-222.

46

Shayan M., Niroumand B., “Synthesis of A356-MWCNT Nanocomposites Through a Novel Two Stage Casting Process”, Materials Science & Engineering A, 582 (2013) 262-269.

45

Jamshidi-Alashti R., Mohammadi Zahrani M., Niroumand B., “Use of Artificial Neural Networks to Predict the Properties of Replicated Open-Cell Aluminum Alloy Foam via Processing Parameters of Melt Squeezing Procedure”, Materials & Design, 51 (2013) 1035-1044.

44

Kaskani, M., Niroumand, B., “On Non-Dendritic Microstructure Formation During Sand Casting of A356 Alloy”, Solid State Phenomena A, 192-193 (2013) 433-440.

43

Amirkhanlou, S., Niroumand, B., “Microstructure and Mechanical Properties of Al356/SiCp Cast Composites Fabricated by a Novel Technique”, Journal of Materials Engineering and Performance, 22 (2013) 85-93.

42

Reisi, M., Niroumand, B., “Initial Stages of Solidification During Semisolid Processing of a Transparent Model Material”, Journal of Materials Chemistry and Physics, 135 (2012) 738-748.

41

Abasipour, B., Monir-Vaghefi, M., Niroumand, B., “Electroless Ni-P-CNT Composite Coating on Aluminum Powder”, Journal of Metals and Materials International, 18 (2012) 1015-1021.

40

Amirkhanlou, S., Niroumand, B., “Fabrication and Characterization of Al356/SiCp Semisolid Composites by Injecting SiCp Containing Composite Powders”, Journal of Materials Processing Technology, 212 (2012) 841-847.

39

Jamaati, R., Amirkhanlou, S., Toroghinejad, M., Niroumand, B., “CAR process: A Technique for Significant Enhancement of As-Cast MMC Properties”, Journal of Materials Characterization, 62, (2011) 1228-1234.

38

Jamaati, R., Amirkhanlou, S., Toroghinejad, M., Niroumand, B., “Comparison of the Microstructure and Mechanical Properties of As-Cast A356/SiC MMC Processed by ARB and CAR Methods”, Journal of Materials Engineering and Performance, 21 (2012) 1249-1253.

37

Reisi, M., Niroumand, B., “Modeling of Shear Induced Dendrite Coarsening During Semisolid Processing”, Journal of Materials and Technology, 28 (2012) 1241-1245.

36

Reisi, M., Niroumand, B., “On the Dilemma of Shear and Flow Requirements for the Evolution of Semisolid Microstructures”, Materials Letters, 68, (2012) 317-319.

35

Ghahremanian, M., Niroumand, B., Panjepour, M., “Production of Al-Si-SiCp Cast Composites by Injection of Low Energy Ball-Milled Al-SiCp Powder into the Melt”, Journal of Metals and Materials International, 18, (2012) 149-156.

34

Khodaverdizadeh, H., Niroumand, B., “Effects of Applied Pressure on Microstructure and Mechanical Properties of Squeeze Cast Ductile Iron”, Journal of Materials & Design, 32, (2011) 4747-4755.

33

Amirkhanlou, S., Niroumand, B., “Effects of Reinforcement Distribution on Low and High Temperature Tensile Properties of Al356/SiCp Cast Composites Produced by a Novel Reinforcement Dispersion Technique”, Journal of Materials Science and Engineering A, A528, (2011) 7186-7195.

32

Khosro Aghaiani, M., Niroumand, B., “Effects of Ultrasonic Treatment on Microstructure and Tensile Strength of AZ91 Magnesium Alloy”, Journal of Alloys and Compounds, 509, (2011) 114-122.

31

Amirkhanlou, S., Rezaei, M., Niroumand, B., Toroghinejad, M., “Refinement of Microstructure and Improvement of Mechanical Properties of Al/Al2O3 Composite by Accumulative Roll Bonding Process”, Journal of Materials Science and Engineering, A528, (2011) 2548-2553.

30

Amirkhanlou, S., Rezaei, M., Niroumand, B., Toroghinejad, M., “High-Strength and Highly-Uniform Composites Produced by Compocasting and Cold Rolling Processes”, Journal of Materials & Design, 32, (2011) 2085-2090.

29

Jamaati, R., Amirkhanlou, S., Toroghinejad, M., Niroumand, B., “Significant Improvement of Semi-Solid Microstructure and Mechanical Properties of A356 Alloy by ARB Process”, Journal of Materials Science and Engineering,  A528, (2011) 2495-2501.

28

Jamaati, R., Amirkhanlou, S., Toroghinejad, M., Niroumand, B., “Effect of Particle Size on Microstructure and Mechanical Properties of Composites Produced by ARB Process”, Journal of Materials Science and Engineering A, (2011) 2143-2148.

27

Amirkhanlou, S., Jamaati, R., Niroumand, B., Toroghinejad, M., “Using ARB Process as a Solution for Dilemma of Si and SiCp Distribution in Cast Al-Si/SiCp Composites”, Journal of Materials Processing Technology, 211, (2011) 1159-1165.

26

Amirkhanlou, S., Jamaati, R., Niroumand, B., Toroghinejad, M., “Manufacturing of High-Performance Al356/SiCp Composite by CAR Process”, Journal of Materials and Manufacturing Processes, 26, (2011) 902-907.

25

Amirkhanlou, S., Jamaati, R., Niroumand, B., Toroghinejad, M., “Fabrication and Characterization of Al/SiCp Composites by CAR Process”, Journal of Materials Science and Engineering, A528, (2011) 4462-4467.

24

Amirkhanlou, S., Niroumand, B., “Development of Al356/SiCp Cast Composites by Injection of SiCp Containing Composite Powders”, Journal of Materials & Design, 32, (2011) 1895-1902.

23

Firoozbakht, M., Monir-Vaghefi, M., Niroumand, B., “Electroless Composite Coating of Ni–P–Carbon Nanotubes on Magnesium Powder”, Journal of Alloys and Compounds, 509S,(2011) S496-S502.

22

Maleki, A., Panjepour, M., Niroumand, B., Meratian, M., “Mechanism of Zinc Oxide–Aluminum Aluminothermic Reaction”, Journal of Materials Science, 45, (2010) 5574-5580.

21

Amirkhanlou, S., Niroumand, B., “Synthesis and Characterization of 356-SiCp Composites by Stir Casting and Compocasting Methods”, Transactions of Nonferrous Metals Society of China, 20, (2010) s788-s793.

20

Abasipour, B., Niroumand, B., Monir-Vaghefi, M., “Compocasting of A356-CNT Composite”, Transactions of Nonferrous Metals Society of China, 20, (2010) 1561-1566.

19

 Nasr Esfahani, M., Niroumand, B., “Study of Hot Tearing of A206 Aluminum Alloy using Instrumented Constrained T-shaped Casting Method” Journal of Materials characterization, 61 (2010) 318-324.

18

Nasr Esfahani, M., Niroumand, B., “Design of A New Hot Tearing Test Apparatus and Modification of its Operation” Journal of Metals and Materials International, 16 (2010) 35-38.

17

Niroumand, B., Mirzadeh, H., Reisi, M., “Evaluation of Cast-On-Strap Joints in Lead-Acid Batteries” Journal of Materials Characterization, 60 (2009) 1555-1560.

16

Nasr Esfahani, M., Niroumand, B., “Design of Hot Tearing Test Apparatus for Cast Alloys” Casting Technologies, 55, (2009) 42-45.

15

Mirzadeh, H., Niroumand, B., “Fluidity of Al-Si Semisolid Slurries during Rheocasting by a Novel Process” Journal of Materials Processing Technology, 209, (2009) 4977-4982.

14

Maleki, A., Meratian, M., Niroumand, B., Gupta, M., “Synthesis of In-situ Aluminum Matrix Composite Using a New Activated Powder Injection Method” Metallurgical and Materials Transactions A, 39, (2008) 3034-3039.

13

Maleki, A., Shafyei, A., Niroumand, B. “Effects of Squeeze Casting Parameters on the Microstructure of LM13 Alloy” Journal of Materials Processing Technology, 209 (2009) 3790-3797.

12

Reisi, M., Niroumand, B., “Growth of Primary Particles during Secondary Cooling of a Rheocast Alloy” Journal of Alloys and Compounds, 475 (2009) 643-647.

11

Ashiri, R., Niroumand, B., Karimzadeh, F., Hamani, M., Pouranvari, M., “Effect of Casting Process on Microstructure and Tribological Behavior of LM13 Alloy” Journal of Alloys and Compounds, 475 (2009) 321-327.

10

Mirzadeh, H., Niroumand, B., “ Effects of Rheocasting Parameters on the Microstructure of Rheo-Centrifuged Cast Al-7.1wt%Si Alloy” Journal of Alloys and Compounds, 474 (2009) 257-263.

9

Reisi, M., Niroumand, B., “Effects of Stirring Parameters on Rheocast Structure of Al-7.1wt%Si Alloy” Journal of Alloys and Compounds, 470 (2009) 413-419.

8

Ghahremainian, M., Niroumand, B., “Compocasting of an Al-Si-SiCp Composite Using Powder Injection Method” Solid State Phenomena, 141-143 (2008) 175-180.

7

 Tahamtan S., Golozar M.A., Karimzadeh F., Niroumand B., “Microstructure and Tensile Properties of Thixoformed A356 Alloy”, Journal of Materials Characterization, (2008) 223-228.

6

Reisi, M., Niroumand, B., “Evolution of Primary Particles Morphology during Secondary Cooling in SSR® Process” Solid State Phenomena, 116-117 (2006) 493-496.

5

Mirzadeh, H., Niroumand, B., “ Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds” Solid State Phenomena, 116-117 (2006) 497-500.

4

Maleki, A., Niroumand, B. Shafeai, A. “Effects of Squeeze Casting Parameters on Density, Macrostructure and Hardness of LM13 Alloy”, Journal of Materials Science and Engineering A, 428, (2006) 135-140.

3

Falak, P., Niroumand, B. “Rheocasting of an Al-Si alloy”, Scripta Materialia,Vol.53/1, (2005) 53-57.

2

Ahmadi, J., Monirvaghefi, M., Salehi, M., Niroumand, B. “Effect of Pearlite Interlamellar Spacing on Predominant Abrasive Wear Mechanism of Fully Pearlitic Steel”, Transactions of Materials and Heat Treatment, 25, (2004) 1207-1213.

1

Niroumand, B., Xia, K. “3D Study of the Structure of Primary Crystals in a Rheocast Al-Cu Alloy”, Journal of Materials Science and Engineering, A283 (2000) 70-75.

 

  • Refereed international conference papers

32

Mosallanejad M.H., Niroumand B., Saboori A., “A feasibility study on the applicability of DED Additive Manufacturing method for repairing Copper Mold Tubes used for Continuous Casting of Steel”, 2nd international conference on Steelmaking and Continuous Casting (ISCC2022), Hormozgan Steel Company (HOSCO), Bandar Abbas, Iran, 2022.

31

Noohi Z., Niroumand B., Timelli G., "Numerical simulation of the effects of a Phase Change Material (PCM) on solidification path of gravity sand cast Al-Cu alloy", International conference on High Tech Die Casting, Italy, 2021.

30

Hamani Jazi M., Niroumand B., “Effects of squeeze casting parameters on surface quality and mechanical properties of a LM13 cast component”, Proceedings of 5th Iran International Aluminum Conference 2018 (IIAC2018), Tehran, (2018).

29

Nosouhian S., Mirzaei M., Niroumand B., “Effect of Grain Size and Oxidation on the Contact Angle of Water with Pure Aluminum”, Proceedings of Iran International Aluminum Conference 2016 (IIAC2016), Tehran, (2016).

28

Emami Najafi Dehkordi S., Hosseini Kupaee M., Niroumand B., "Effects Of Casting Parameters on Fluidity of Cast LM24 Aluminum Alloy", Proceedings of Iran International Aluminium Conference 2014 ( IIAC2014), Tehran, (2014), Paper 1-636.

27

Nasr Esfahani M.,, Niroumand B., Kermanpour A., "An Apparatus for Real Time Study of Free Dendritic Growth: Design, Manufacture and Testing", Proceedings of Iran International Aluminium Conference 2014 ( IIAC2014), Tehran, (2014), Paper 2-577.

26

Saeedi, N., Ashrafizadeh, F., Niroumand, B., “Bainitic Heat Treatment and Fracture Mode of a Ni-Cr-Mo Low Alloy Steel” Proceedings of 16th international Metallurgy & Materials congress (IMMC 2012), Turkey, (2012).

25

Shayan, M., Niroumand, B., Toroghinejad, M., “Effect of Applied Pressure on Mechanical Properties of Squeeze Cast Al-MWCNT Composites” Proceedings of Materials Science and Technology (MS&T) 2012, USA, (2012) 128-135.

24

Firoozbakht, M., Niroumand, B., M., Monir-Vaghefi, “Production of Cast AZ91-CNT Nano-Composite by Addition of Ni-P-CNT Coated Magnesium Powder to the Melt”, Proceedings of TMS 2012 Annual Meeting & Exhibition, USA, (2012) 741-748.

23

Abbasipour, B., Niroumand, B., Monir-Vaghefi, M., “Mechanical Properties of A356-CNT Cast Nano Composite Produced by a Special Compocasting Route”, Proceedings of TMS 2012 Annual Meeting & Exhibition, USA, (2012) 733-740.

22

Niroumand, B., Karbasi, M., Bagherpoor Torghabe, H., "Effect of gating system design on hot tearing susceptibility of A206 alloy", Proceedings of 11th International Foundry Conference, Croatia , (2011) 119-126.

21

Niroumand, B., Azarpira, H., "Semisolid Rheocasting of AZ91 magnesium alloy", Proceedings of 11th. International Foundry Conference, Croatia, (2011) 127-137.

20

Amirkhanlou S., Niroumand B., "Synthesis and Characterization of 356-SiCp Composites by Stir Casting and Compocasting Methods", Proceedings of 11th Conference on Semi-Solid Processing of Alloys and Composites (S2p 2010), China, (2010) 141-146.

19

Abbasipour B., Niroumand B., Monir-Vaghefi M., "Compocasting of A356-CNT Composite", Proceedings of 11th Conference on Semi-Solid Processing of Alloys and Composites (S2P 2010), China, (2010) 14-19.

18

Maleki, A., Niroumand,B., Meratian, M, Panjepour, M., "Optimization of reactants ratio in aluminothermic reaction of aluminum and zinc oxide", Proceedings of the 48th annual conference of Metallurgists of CIM, Canada (2009) 33-41.

17

Khosro Aghayani, M., Niroumand, B., "Effect of ultrasonic treatment on the microstructure of AZ91 magnesium alloy" Proceedings of Iran International Aluminum Conference (IIAC2009), Tehran (2009) 81-87.

16

Seiyed Beigi, M. T., Niroumand, B., "Effects of pouring temperature on the structure, density, soundness and hardness of a Semi-Solid Rheocast part made of A356 alloy" Proceedings of Iran International Aluminum Conference (IIAC2009), Tehran,(2009) 53-60.

15

Nasr Esfahani, M., Niroumand, B., " Effect of melt super heat on hot tearing of A206 Aluminum alloy" Proceedings of Iran International Aluminum Conference (IIAC2009), Tehran,(2009) 47-52.

14

Parvanian, A. M., Kermanpur, A., Niroumand, B., "Numerical simulation of effective parameters on fluidity of semisolid A356 aluminium alloy" Proceedings of Iran International Aluminum Conference (IIAC2009), Tehran,(2009)16-19.

13

Seiyed Beigi, M. T., Niroumand, B., "Effects of pouring temperature on the structural characteristics of a SSR processed aluminium part" Proceedings of the 2nd international conference on Aluminium Casting, Moscow, (2009) Paper 27.

12

Nasr Esfahani, M., Niroumand, B., "Effect of casting temperature on hot tearing of A206 aluminium alloy" Proceedings of the 2nd international conference on Aluminium Casting, Moscow, (2009) Papre 26.

11

Vahabzadeh, S., Niroumand, B., "In-situ Observation of Solidification Using a Model Material", Proceedings of the International Conference on Modeling, Simulation & Applied Optimization (ICMSAO’09), American University Of Sharjah, UAE, (2009) Paper 41-38327.

10

Maleki, A., Meratian, M, Niroumand, B., Gupta, M, Panjepour, M., "Effect of Reactants Ratio on the on the Microstructure of In-situ Processed Al/Al2O3 Composite", Proceedings of the 1st International Conference on Composites: Characterization, Fabrication and Application (CCFA-1), Kish Island, Iran, 2008, Article CCFA-64341.

9

Maleki, A., Niroumand B., Meratian M., Gupta, M. "Effect of Melt Temperature on Microstructure of In-Situ Al-Al2o3 Composites", Proceedings of 16th International Conference on Processing and Fabrication of Advanced Materials (PFAM XVI), Singapore, (2007), 176-185.

8

Mirzadeh, H., Niroumand, B., "Study of casting Fluidity of Rheocast Al-7.1wt%Si alloy in Sand Molds" Proceedings of the 5th Decennial International Conference on Solidification Processing, Sheffield, (2007) 620-623.

7

Maleki, A., Niroumand,B., Shafyei, A., "Effects of Squeeze Casting Parameters on the Structure and Mechanical Properties of a LM13 Alloy"  in Euromat 2005,Prague, Czech Republic, (2005).

6

Falak, P., Niroumand, B., Najafizadeh, A. “Microstructure-Processing Relationship of a Rheocast Al-Si Alloy: Evaluation of a New Mechanism” in 8th International Conference on Semi-Solid Processing of Alloys and Composites, Cyprus (2004) Paper 11-1.

5

Niroumand, B., Xia, K. “Effect Of Flow Pattern Inside the Processing Crucible on the Microstructure of a Rheocast Al-Cu Alloy” in 8th International Conference on Semi-Solid Processing of Alloys and Composites, Cyprus (2004) Paper 06-2.

4

Niroumand, B., Xia, K. “Coarsening Behaviour of Primary Particles in a Rheocast Al-Cu Alloy” in 7th International Conference on Semi-Solid Processing of Alloys and Composites , Japan (2002) 317-322.

3

Niroumand, B., Koh, H. J., Tausig, G., Xia, K.“Observation of Microstructure in Al-Cu Rheocast Alloys by Transmission Electron Microscopy” in 6th International Conference on Semi-Solid Processing of Alloys and Composites , Italy (2000) 783-788.

2

Niroumand, B., Xia, K. “Relationship between Microstructural Features in a Semisolid Processed Al-Cu Alloy” in 5th International Conference on Semi-Solid Processing of Alloys and Composites , USA (1998) 637-644.

1

Niroumand, B., Xia, K. “Effect Of Mechanical Stirring on Microstructure of a Semisolid Cast Al Alloy”  in International Conference on Casting & Solidification of Light Alloys, Queensland, Australia (1995).

 

  • National journal and conference papers

More than 130 papers published in national journals and conferences in Persian (Farsi).

تحت نظارت وف ایرانی